Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 99)

87
UniConfig
User’s Guide
Special Takes
Use the ‘Actions’ menu or the context menu to have access to additional commands:
In all case, the takes affect the crosspoint matrix in the router and the crosspoint states are
reflected in the ‘Connection’ window’s crosspoint list, either automatically or when you click
Read Outputs.
Diagonal Takes
When you choose the ‘Diagonal Take’ command, a dialog appears:
Specify the range of outputs that will be affected. Specify in the input field the starting point for
the take. The inputs for the take increment from the starting point. The result for the take illus-
trated here is that input 1 switches to output 1, input 2 switches to output 2, and so on, for
inputs 1–256 and outputs 1–256.
Notes
1 Diagonal takes need not start at input 1 or output 1.
2 Machine control ports “connected” on the diagonal (1 to 1, 2 to 2, and so on) are really
tristated (disconnected) unless the partition in the router (or the diagnostic crosspoint list in
UniConfig) is in data X/Y mode. In data X/Y mode, status fields in the crosspoint list read
“Bcast controlled.”
Actions Menu
Context Menu