Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 38)

26
Communication
Communication
Writing a Control Card’s Configuration
The reason to write a configuration to a control card is that you have made a change. It is
presumed that you already have the control card selected and open for editing.
1 From the ‘Window’ menu, select ‘Configuration’. The ‘Configuration’ window appears:
2 Click Write All to save all changes to the control card. A confirmation message appears:
3 Click OK to dismiss the message. Then UniConfig asks permission to reset the control card.
Click Yes if you want to reset the control card. Click No to cancel.