Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 151)

139
UniConfig
User’s Guide
In NV9000-SE Utilities
1 Define the audio router and its physical level so that it matches UniConfig:
(In this NV9000 configuration, an HD router was also defined, but it is not shown.)
2 Create virtual levels if none available have a suitable name. In this configuration, we created
two mono levels, “LEFT” and “RIGHT”:
It is a 2-step process. First add the virtual levels to the virtual level table. Then, assign a signal
type to the virtual level in the virtual level bindings table. The signal type is ‘AES Mono’.
Virtual Level Table
Virtual Level Bindings Table
1
2