Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 134)

122
System Status
System Status
Performing System Tasks
When the ‘System Status’ window is active, the ‘Actions’ menu provides several commands.
From the ‘Actions’ menu, choose either ‘System’ or ‘Controller State’ and then follow the
submenus to select an option.
Following are the menu options.
System > Erase
 Do not perform this operation unless directed to do so by a Grass Valley support engineer.
There are 3 options and a few sub-options:
• ‘All Flash’ — erases the entire flash memory, including all firmware.
• ‘All Battery-Backed RAM’— erases the contents of battery-backed RAM.
• ‘EEPROMS’ — select either ‘All’, ‘512 Byte’ or ‘2048 Byte’. This option erases the selected
EEPROM(s).
System > Clear
There are two options:
• ‘All Locks and Protects’ — releases all locks and protects that have been applied in the router
control system. See Locks on page 105.
• ‘Logs’ — erases the log file.