Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 143)

131
UniConfig
User’s Guide
NV8256-Plus
The NV8256-Plus can be configured with 1, 2, 3, or 4 frames and its maximal matrix grows
linearly with the number of frames: 256×256, 512×512, 768×768, or 1024×1024. Its architecture
is the same as if it were 1, 2, 3, or 4 nnn×256 routers, where nnn is 256, 512, 768, or 1024. The
values for the ‘Expansion Configuration’ section that give maximal range are:
Main Slave1 Slave2 Slave3
Frames In Out In Out
2 Start 1 1 1 257
End 512 256 512 512
3 Start 1 1 1 257 1 513
End 768 256 768 512 768 768
4 Start 1 1 1 257 1 513 1 769
End 1024 256 1024 512 1024 768 1024 1024
NV8288-Plus
The NV8288-Plus has a matrix up to 576 x 576. Its architecture is the same as if it were two
576×288 routers. The values for the ‘Expansion Configuration’ section that give maximal range
are:
Main Slave
Input Output Input Output
Start 1 1 1 289
End 576 288 576 576
NV8576-Plus
The expanded NV8576-Plus has a matrix up to 1152 x 1152. Its architecture is the same as if it
were two 1152×576 routers. The values for the ‘Expansion Configuration’ section that give
maximal range are:
Main Slave
Input Output Input Output
Start 1 1 1 577
End 1152 576 1152 1152