Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 111)

99
UniConfig
User’s Guide
7 Click Apply Changes to Selected Outputs, or, in the ‘Edit’ menu, click ‘Apply Changes’ to
apply your changes to the selected outputs. This does not write your changes to the control
cards. The changes appear in the list of outputs.
8 Optionally, repeat steps 5–7 for other outputs that have different switching parameters.
9 Click Write All, or in the ‘Edit’ menu, click ‘Write Changes’ to write changes to the control
card.
10 Repeat steps 1–9 for each control card being updated.