Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 123)

111
UniConfig
User’s Guide
Check ‘Send all reads to Salvo Window’ to have cause the ‘Connections’ window to display
data that are the result of a read or a take in the salvo pane.
Click ‘OK’ to dismiss the dialog and retain its settings.
When you have opted to “show salvo window,” the salvo pane appears in the ‘Connections’
window:
The salvo pane, freshly created, is empty.
Building a Salvo
There are 3 ways to build a salvo:
• Read outputs from the router (if you have enabled ‘Send reads to the Salvo Window’).
• Add takes to the salvo.
• Edit individual takes in the salvo.
Reading Outputs from the Router
1 Go to the ‘Connections’ window and turn on the salvo pane if you have not done so.
2 Also enable ‘Send reads to the Salvo Window’ if you have not done so.
You can use the ‘Connection Options’ dialog to do this or you can check the ‘Send reads to
the Salvo Window’ option of the ‘Connections’ window’s context menu.
3 In the ‘Connections’ window, specify a range of outputs and click Read Outputs.
The outputs, with the inputs currently routed to them, are transferred to the salvo pane.