Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 125)

113
UniConfig
User’s Guide
5 Click Modify. The take you selected is modified accordingly, in its place in the salvo.
Both the input and the output of the take can be changed. You can leave either one as it was.
After you click Modify, the dialog closes.
6 Repeat steps 2–5 until you have modified the individual takes you wanted to modify.
Salvo Management
Saving a New Salvo
1 Ensure that the ‘Connections’ window is active.
2 From the ‘File’ menu, choose ‘Save Salvo As . . .’ A dialog appears.
3 Click Browse in the dialog, then specify a folder and file name for the salvo.
4 Click Save.
Saving an Existing Salvo
If you have opened a salvo (that exists in your PC’s file system), you can re-save the (possibly
modified) salvo.
1 Ensure that the ‘Connections’ window is active.
2 From the ‘File’ menu, choose ‘Save Opened Salvo’.
3 No further action is necessary.
Opening a Salvo
You can open salvo files at any time. When you open the file, the file’s contents appears in the
salvo window.
 If the file you open is not a salvo or the contents of the salvo file have been modified improp-
erly, UniConfig will that the file is invalid.
 Be sure that the salvo you are opening contains the set of takes you want.
How to Open and Upload a Salvo
1 Go to the ‘Connections’ window.
2 From the ‘File’ menu, choose ‘Open Existing Salvo’. A dialog appears.
3 Click Browse and navigate to the folder that contains the file.
4 Select the file and click Open.
The takes in the file appear in the salvo pane.
5 Optionally, click Execute in the salvo pane to execute the salvo (i.e., perform the takes in the
salvo). The takes affect the router’s crosspoint directly.