Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 108)

96
EC9535
EC9535
How to Set Up Partitions for an EC9535
1 Select a control card.
2 From the ‘Window’ menu, choose ‘Configuration’. The ‘Configuration’ window appears:
3 Click Read All. The ‘Configuration’ window populates with the current configuration and
Ethernet settings. If no prior configuration is stored, many of the fields are blank.
4 Create a level.
To do so, enter ‘Level’, ‘Physical Inputs’, ‘Controller Inputs’, ‘Physical Outputs’ and ‘Controller
Output’ information in the grid at the top of the window. Each row represents a level.
The EC9535 has only one partition. The level number must be 0 to be compatible with the
requirements of the SMS7000.
The following is a list of the fields and the values you should enter (for an EC9535):
These values are appropriate for the SMS7000 control system.
5 Click Write All to writes changes to the control card.
6 Repeat steps 1–5 for the other EC9535 control card.
UniConfig Field Description Values
Level Numeric value identifying the partition. 0
Physical Inputs Starting and ending physical input connector numbers. 1–1024
Controller Input Starting logical input connector number. The ending num-
ber is derived. 1
Physical Outputs Starting and ending physical output connector numbers. 1–1024
Controller Output Starting logical output connector number. The ending
number is derived. 0
Signal Type Acceptable signal types for the partition ‘Video, Async,
AES, Timecode’