Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 124)

112
Salvos
Salvos
Adding Individual Takes
You can append individual takes to the salvo using the ‘Add Single Take’ command of the
‘Actions’ menu.
How to Add Individual Takes
1 Go to the ‘Connections’ window and turn on the salvo pane if you have not done so.
2 From the ‘Actions’ menu, choose ‘Edit/Change Salvo > Add Single Take’. A dialog appears:
3 Enter an ‘Input’ number and an ‘Output’ number in the fields provided.
4 Click Add. The take you specified is appended to the salvo. (It appears at the end of the list of
takes in the salvo, increasing the number of takes in the salvo by one.)
5 Repeat steps 3 and 4 until you have added the individual takes you wanted.
6 The dialog does not automatically close when you add a take. When you have finished, click
Close to dismiss the dialog.
Modifying Individual Takes Within a Salvo
You can modify any take in a salvo.
How to Modify Individual Takes
1 Go to the ‘Connections’ window and turn on the salvo pane if you have not done so.
2 Select a take in the salvo. (You can select only one.)
3 From the ‘Actions’ menu, choose ‘Edit/Change Salvo > Modify Single Take’. A dialog appears:
4 Enter an ‘Input’ number and an ‘Output’ number in the fields provided.
‘Add’ Button
‘Modify’ Button