Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 150)

138
Technical Details
Technical Details
(The device names for both level sets should be similar so that operators can choose the right
device without thinking.)
The NV9000 configuration used in this example is somewhat contrived and simplistic, but it
illustrates the method. It is easy to create variations of the method.
Method 2
Problem: how do you configure an input or output to be both stereo and mono?
In UniConfig, create 1 mono partition. As mentioned, the number of mono (i.e., controller) ports
is double the number of physical ports.
In the NV9000 configuration, create a level set containing two mono levels (call them L and R if
you like) and create audio devices that use that level set. You can switch the devices as stereo.
Using breakaway, you can switch the individual channels.
Method 2 Details
In UniConfig
Create 1 mono partitions. This is an example for the NV7512:
Here we have 512 connectors supporting 1024 mono channels. We chose level 2 because, in the
NV9000 system of this example, level 1 is for the HD router.