Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 35)

23
UniConfig
User’s Guide
6 Click OK to dismiss the message. Then UniConfig asks permission to reset the control card.
Click Yes if you want to reset the control card at this time.
7 Repeat steps 1–6 for the other control card in the router frame if one is present.
Communications Options
Retaining Serial Port Settings
You can specify that UniConfig is to retain its most recent serial settings. Otherwise, UniConfig
uses the serial settings of the currently selected control card.
How to Retain the Most Current Serial Communication Settings
1 From the ‘Tools’ menu, select ‘Options’. The ‘Configuration Options’ dialog appears:
 A different ‘Configuration Options’ dialog appears if you have the ‘Connections’ window
open. If that occurs, close the ‘Connections’ window and re-issue the ‘Options’ command
from the ‘Tools’ menu.
2 Check the ‘Retain serial port settings’ check box. By default this box is checked.
3 Click OK to save changes and close the dialog or click Cancel to close the dialog without sav-
ing changes.
4 Repeat steps 1 through 3 for each control card you want to update.