Grass Valley K2 Summit Client Service Manual Nov.23 2009 - Manual (Page 71)

12 October 2009 K2 Summit Production Client Service Manual 71
Installing the Fibre Channel card driver
g. Click Finish .
3. If the K2 Summit Client has a dual port Fibre Channel card, on the Found New
Hardware wizard, install the driver on the second FC port as follows:
a. Select Install from a list or specific location . Click Next .
b. Select Don’t search. I will choose the driver to install . Click Next .
c. Select Have Disk .
d. Browse to C:\Windows and find LSI_SCSIPORT_1.21.25.00. Click Open and
OK .
e. Start the driver install by selecting Next .
f. On the Hardware Installation page, click Continue Anyway .
g. Click Finish .
4. On the Found New Hardware wizard, install the first LSI Pseudo Device as
follows:
a. Select Install from a list or specific location . Click Next .
b. Select Don’t search. I will choose the driver to install . Click Next .
c. Select Have Disk .
d. Browse to C:\Windows and find LSI_SCSIPORT_1.21.25.00. Click Open and
OK .
e. Start the driver install by selecting Next .
f. On the Hardware Installation page, click Continue Anyway .
g. Click Finish .
5. If the K2 Summit Client has a dual port Fibre Channel card, on the Found New
Hardware wizard, install the driver on the second LSI Pseudo Device port as
follows:
a. Select Install from a list or specific location . Click Next .
b. Select Don’t search. I will choose the driver to install . Click Next .
c. Select Have Disk .
d. Browse to C:\Windows and find LSI_SCSIPORT_1.21.25.00. Click Open and
OK .
e. Start the driver install by selecting Next .
f. On the Hardware Installation page, click Continue Anyway .
g. Click Finish .
6. If the K2 Summit Client is on a redundant K2 Storage System or is connected to
direct-connect storage, do the following:
a. Install MPIO as instructed in the K2 System Guide.
b. Make the following registry settings: