Grass Valley K2 Summit Client Service Manual Nov.23 2009 - Manual (Page 48)

48 K2 Summit Production Client Service Manual 12 October 2009
Chapter 3 Service Procedures
Enabling the write filter
Prerequisite:
• K2 software must be installed on the K2 Summit Client.
1. If you have not already done so, log on to the K2 Summit Client with administrator
privileges.
2. From the Windows desktop click Start | All Programs | Grass Valley | Write Filter
Utility .
FBWF Manager opens.
3. Under Filter Settings, set Filter to Enable .
4. Under Protected Volumes, set C: to Protected .
5. Click OK .
6. When prompted, restart the K2 Summit Client.
Disabling the write filter
Prerequisite:
• K2 software must be installed on the K2 Summit Client.
1. If you have not already done so, log on to the K2 Summit Client with administrator
privileges.
2. From the Windows desktop click Start | All Programs | Grass Valley | Write Filter
Utility .
FBWF Manager opens.
3. Under Filter Settings, set Filter to Disable .
4. Click OK .
5. When prompted, restart the K2 Summit Client.
Committing a file to disk with write filter enabled
Prerequisite:
• K2 software must be installed on the K2 Summit Client.
You can over-ride the write filter for an individual file and permanently save the file
to disk.
1. If you have not already done so, log on to the K2 Summit Client with administrator
privileges.
2. From the Windows desktop click Start | All Programs | Grass Valley | Write Filter
Utility .
FBWF Manager opens.
3. Under Exclusions, click Browse .
4. Browse to the file that you want to save permanently, select the file and click OK .