Grass Valley K2 Summit Client Service Manual Nov.23 2009 - Manual (Page 36)

36 K2 Summit Production Client Service Manual 12 October 2009
Chapter 1 Product Description
Status indicators
The following sections describe the visual and audible indicators that communicate
the current operating status and system health of the K2 Summit Client.
Front panel indicators
The front bezel assembly must be installed for front panel LEDs to provide status.
Power LED
The Power LED indicates status as follows::
WARNING: The power standby switch does not turn off power to the
system. To turn power off both power supplies must be disconnected
from the power source.
Service LED
The following table explains the status conditions indicated by the different Service
LED behaviors. If two or more status conditions occur simultaneously, the LED
displays the behavior for the highest priority condition.
LED behavior Status Condition
Off The standby switch is set to Off and the K2 Summit Media Client is not
operational.
Green steady on The standby switch is set to On and the K2 Summit Media Client is either in the
startup process or has competed the startup process and is operational..
K2 SUMMIT PROD UCT ION
CLIENT
Power
LED
Service
LED
!
LED behavior Status Condition Priority
Flashing pattern alternating
Yellow/Green/Red/Off twice a
second Identify — The K2 Summit Client is being directed to
identify itself by NetCentral or some other
application. 1
Solid Red Global failure — The K2 Summit Client system
software has detected a critical error or failure that
impacts record/play operations. 2
Solid Yellow Warning — The K2 Summit Client system software
has detected a problem that requires attention but does
not immediately impact record/play operations. For
example, a fan or power supply has failed but its
redundant partner is maintaining functionality. 3