Identify adapters – Grass Valley K2 Summit Client Service Manual Nov.23 2009 User Manual
Page 54
54
K2 Summit Production Client Service Manual
12 October 2009
Chapter 3 Service Procedures
16. Click
Use the following IP address
and set the address to
192.168.200.200
and
set the subnet mask to
255.255.255.0.
NOTE: The Microsoft Loopback Adapter must have its IP address set to
192.168.200.200. If a different IP address is used the stand-alone storage K2
Summit Client can not access its own media file system.
17. Click
OK
and
Close
to exit.
18. Proceed as follows:
• If you have no additional network configuration to do, reorder adapters now.
Refer to
. Then enable the write filter.
• If you have additional network configuration tasks to do, do not reorder adapters
now. Continue with the next task
.
Identify adapters
On some K2 Summit Clients, it is possible that the Microsoft Windows operating
system has enumerated the “Intel® PRO/1000 PT Dual Port Server Adapter…”
names in an unpredictable sequence. You must identify adapters by their location
rather than by the enumeration assigned by the Windows operating system and verify
or modify the adapter name as necessary.
1. Open Device Manager as follows:
a. On the Windows desktop, right-click
K2 Summit Production Client
(My
Computer) and select
Manage
. The Computer Management window opens.
b. In the left pane select
Device Manager
.
Device Manager opens in the right pane.
2. In Device Manager, expand
Network Adapters
.