Grass Valley 3-CCD CameraMan - Manual (Page 94)

94 CameraMan Installation and Operation Manual
Appendix K — CPT-2018-A3DSP On-Screen Menus
Figure 64. Back of Camera Block
2. The use mode setting menu (shown below) appears on the monitor
screen and one of the use mode blinks
Figure 65. Use Mode Setting Menu
3. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let
the desired use mode blink.
• MENU switch: The blinking item moves up one.
• ITEM/AWC switch, NO/BAR switch: The blinking item moves down
one.
4. Press the YES/ABC switch. The blinking use mode comes into effect.
After the use mode setting menu is shown for about 5 seconds, the
camera returns to be ready for operation. Then, the camera operates in
the selected use mode.
Menu Item Setting
• Each of the four use modes of the camera has a main menu (example
shown below).