Grass Valley 3-CCD CameraMan - Manual (Page 71)

CameraMan Installation and Operation Manual 71
Submenus Overview
Color Matrix Settings
Figure 48. Color Matrix Settings Submenus
Dark Detail (0 to 5) The contours of the darker portions of an object can be emphasized. This setting is possi-
ble only when the Level Dependent setting is set to 0%.
Chroma Detail (0 to 15) The contours of high-hue portions of an object can be emphasized.
Flesh DTL Level Low: The roughness of the flesh tones is minimized.
Mid: This is the standard setting.
High: The outlines of the flesh tones are accentuated.
Corner Detail Corner detail, which improves the resolution of corners, can be turned ON or OFF when the Detail
setting is at High or Low.
Precision Detail (OFF, Low, High) This setting is to narrow detail width and suppress detail glare.
Table 22. Color Matrix Settings
B_Mg Gain Increases or decreases the intermediate color between blue and magenta.
B_Mg Phase Varies the hue of the intermediate color between blue and magenta.
Mg Gain Increases or decreases magenta.
Mg Phase Varies the hue of the magenta.
Mg_R Gain Increases or decreases the intermediate color between magenta and red.
Mg_R Phase Varies the hue of the intermediate color between magenta and red.
R Gain Increases or decreases the red.
R Phase Varies the hue of the red.
R_YI Gain Increases or decreases the intermediate color between red and yellow.
R_YI Phase Varies the hue of the intermediate color between red and yellow.
YI Gain Increases or decreases the intermediate color of yellow.
YI Phase Varies the hue of the yellow.
YI_G Gain Increases or decreases the intermediate color between yellow and green.
YI_G Phase Varies the hue of the intermediate color between yellow and green.
G Gain Increases or decreases the green.
G Phase Varies the hue of the green.
G_Cy Gain Increases or decreases the intermediate color between green and cyan.
G_Cy Phase Varies the hue of the intermediate color between green and cyan.
Cy Gain Increases or decreases the cyan.
Table 21. Detail SEttings