Grass Valley 3-CCD CameraMan - Manual (Page 78)

78 CameraMan Installation and Operation Manual
Appendix J — CPT-2018-A3DS On-Screen Menus
Figure 50. .Back of Camera Block
2. The use mode setting menu ( Figure 51 ) appears on the monitor screen
and one of the use mode blinks
Figure 51. .Use Mode Setting Menu
3. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let
the desired use mode blink.
• MENU switch: The blinking item moves up one.
• ITEM/AWC switch, NO/BAR switch: The blinking item moves down
one.
4. Press the YES/ABC switch. The blinking use mode comes into effect.
After the use mode setting menu is shown for about 5 seconds, the
camera returns to be ready for operation. Then, the camera operates in
the selected use mode.
Menu Item Setting
• Each of the four use modes of the camera has a main menu ( Figure 52 ).