Grass Valley 3-CCD CameraMan - Manual (Page 61)

CameraMan Installation and Operation Manual 61
Menu Item Setting
Menu Item Setting
• Each of the four use modes of the camera has a main menu ( Figure 38 )
Figure 38. Main Menu - Halogen, Fluorescent, Outdoor Mode
• Each item of the main menu has a submenu, which consists of several
settings.
• These settings have been preset to the optimum values to suit each use
mode, and can be changed to suit actual shooting conditions.
1. From the camera alone: Keep the MENU switch depressed for 5
seconds or more. The main menu appears on the monitor screen.
2. Each time the MENU switch, ITEM/AWC switch, or NO/BAR switch
is pressed, the blinking item moves up or down.
3. When the YES/ABC switch is pressed after selecting the desired item
to blink, the submenu for the selected item appears on the screen.
4. Select the desired item to be changed in its settings using the MENU
switch and ITEM/AWC switch.
5. Press the YES/ABC switch or NO/BAR switch to change the settings.
6. Select [Return] using the MENU switch and ITEM/AWC, then press
the YES/ABC switch to return to the main menu.
7. After changing the settings, take the following steps. Camera alone:
Select [End] using the MENU switch and ITEM/AWC switch and press
the YES/ABC switch.
Submenus Overview
The submenus on page 62 through page 66 are for the Halogen Mode, Flu-
orescent Mode, and Outdoor Mode on the PAL version of the 4:3 Fixed 3-
CCD Digital Camera. Refer to page 66 through page 72 for the User Mode
submenus.