Grass Valley 3-CCD CameraMan - Manual (Page 32)

32 CameraMan Installation and Operation Manual
Appendix C — Camera Specifications
CameraMan Clearance
The minimum dimension for the CameraMan is a circular diameter of 30”.
This accounts for both camera and cable clearance. Check cable movement
to avoid binding and stress on the camera.
Image Elements 2/3” IT type 3-CCD
Pixels Total Elements: Approx. 510,000 [595,728]
Effective Elements: Approx. 460,000 [538,200]
Imaging Area 8.8H X 6.6V (mm) (2/3” 4:3)
9.6H X 5.4V (mm) (2/3” 16:9)
Scanning System 2:1 interlaced NTSC system
[2:1 interlaced PAL system]
Scanning Frequency Horizontal = 15.734 kHz [15.625 kHz]
Vertical = 59.94 Hz [50 Hz]
Lens Mount 2/3” Bayonet Mount
Synchronize System Internal/external synchronization
Standard Illumination 2000 Ix, F11
Minimum Illumination 0.4 Ix (F1.7, Night Eye H)
Signal-to-Noise Ratio 65 dB (DNR on) [63 (DNR on)]
Horizontal Resolution 850 lines
Registration 0.05%
Image Enhancer Horizontal/vertical
White Balance A/B 2 memory AWC,ATW
Black Balance Self-adjusting
Color Bar SMPTE color bar (setup 0/7.5IRE)
[EBU color bar]
Shutter Speed OFF, 1/100 [1/120], 1/250, 1/500, 1/1000, 1/2000, 1/
4000, 1/10000 Synchro-scan ELC
Gain Manual: max. 42 dB (0~30 dB in steps, Night Eye H/L)
Auto: max. 42 dB (AGC 0~30 dB, Night Eye/H)
Iris Auto (Manual by RCU control)
Video Output Composite: 1 Vp-p/75 ohms (BNC, 50P connector)
YC: Y 1 Vp-p, C 0.286 Vp-p [0.3 Vp-p] (50P connector)
Component: Y 1.0 Vp-p, Pr/Pb 0.7 Vp-p, RGB 0.7 Vp-p/
75 ohms (50P connector)
Operating
Temperature 14 o F~113 o F (-10 o C~+45 o C)