Figure 9. back of camera, Back of camera block overview – Grass Valley 3-CCD CameraMan User Manual
Page 12
12
CameraMan Installation and Operation Manual
Section 1 — General
Figure 9. Back of Camera
Back of Camera Block Overview
•
Turns on the on-screen menu for appearance adjustments. Also
used to scroll upward through the on-screen menus.
•
When in shooting mode, the automatic white balance control can be set with
this switch. It can also be used to scroll downward through the on-screen
menus.
•
When in shooting mode, the automatic black balance control can be set with
this switch. It is also used to display and increase the value of the sub-menus
of the main on-screen menu.
•
When in shooting mode, the color bar and the shooting conditions are alter-
nately indicated by pressing this switch. This is also used to scroll downward
through, or lower the value of sub-menu items.
•
A digital video signal is provided at this BNC connector.
•
This is an ANALOG Video Out signal which is utilized to view the on-screen
menus.
•
A GEN LOCK BNC connector used to synchronize the camera by connecting it
to the network’s Video Timing Source.
•
Input terminal for lens iris control.
•
Not Used.