Grass Valley 3-CCD CameraMan - Manual (Page 39)

CameraMan Installation and Operation Manual 39
Appendix
F
The 20x Lens Shroud
The 20x version of the CameraMan 3-CCD DIGITAL Camera comes
equipped with a rectangular lens shroud (
Figure 20 ). The shroud helps to
keep out glares from light sources located on the sides of the camera.
Figure 20. Lens Shroud
1. Locate the red dots on the top and bottom of the shroud, and on the lens
itself.
2. Align the red dot on the shroud with the dot on the lens, then slide the
shroud over the lens.
3. Tighten the shroud in place using the bolt attached to the shroud.