Grass Valley 3-CCD CameraMan - Manual (Page 44)

44 CameraMan Installation and Operation Manual
Appendix H — CPT 2018-A3D On-Screen Menus
Figure 22. Camera Back Switches
2. The use mode setting menu ( Figure 23 ) appears on the monitor screen
and one of the use modes blinks.
Figure 23. Use Mode Setting Menu
3. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let
the desired use mode blink.
• MENU switch: The blinking item moves up one.
• ITEM/AWC switch, NO/BAR switch: The blinking item moves
down one.
4. Press the YES/ABC switch. The blinking use mode comes into effect.
After the use mode setting menu is shown for about 5 seconds, the
camera returns to be ready for operation. Then, the camera operates in
the selected use mode.
Note On-screen menu items can only be viewed by connecting to the analog VIDEO
OUT connector on the rear of the camera block.