Submenus overview, Brightness setting, Figure 53. brightness setting submenu – Grass Valley 3-CCD CameraMan User Manual
Page 80: Table 26. brightness settings

80
CameraMan Installation and Operation Manual
Appendix J — CPT-2018-A3DS On-Screen Menus
Submenus Overview
The submenus on page 80 through page 83 are for Halogen Mode, Fluores-
cent Mode, and Outdoor Mode on the NTSC version of the 4:3/16:9 Swit-
chable 3-CCD Digital Camera. Refer to page 84 through page 89 for User
Mode.
Brightness Setting
Figure 53. Brightness Setting Submenu
Table 26. Brightness Settings
Picture Level
(-50 to +50) Convergence level of AUTO IRIS/AUTO GAIN UP/
AUTO ND (ELC) can be adjusted.
Light PEAK/AVG
(P50 to A50) The ratio of AUTO IRIS/AUTO GAIN up/AUTO ND
(ELC) detected peak to average can be adjusted within a predeter-
mined range.
Light Area
A photometric measurement method can be selected for AUTO IRIS/
AUTO GAIN UP/AUTO ND (ELC).
ALL: All the screen area is measured.
Center: The screen is measured mainly in the center area, about
one-third of both the top and bottom and one-third of both the right
and left portions of the screen are excluded from measurement.
Top Cut: About one-third of the top part of the screen is excluded
from measurement.
BTM Cut: About one-third of the bottom portion of the screen is
excluded from measurement.
R/L Cut: About one-third of both the right and left portions of the
screen are excluded from measurement.