Color setting, Figure 54. color setting submenu, Table 27. color settings – Grass Valley 3-CCD CameraMan User Manual
Page 81

CameraMan Installation and Operation Manual
81
Submenus Overview
Color Setting
Figure 54. Color Setting Submenu
Auto ND (ELC)
OFF: Luminance is not automatically adjusted by the electronic
shutter.
ON: The electronic shutter is controlled to automatically adjust the
luminance.
*ON is automatically selected when the Shutter Speed on the sub-
menu [Other Set] is set to [Auto ND]. OFF is selected when other
than [Auto ND] is selected.
Auto Gain Up
OFF: The light quantity is not adjusted automatically.
ON: The light quantity is adjusted automatically. The maximum to
which the gain can be increased using the Auto Gain Up function is
selected by the AGC Max Gain setting.
AGC Max Gain
(6dB, 12dB, 18dB, 24dB, N/Eye L, N/Eye H) This is used to set the
maximum amount to which the gain can be increased when “ON”
has been selected as the Auto Gain Up setting.
Manu Gain Up
Manual setting is possible only when the Auto Gain Up setting is
“OFF”.
0 dB: 0 dB should be selected in normal cases.
1 dB - 30 dB: Use this range if sufficient video output cannot be
obtained even when the lens iris is opened in shooting dark scenes.
N/Eye L (Night Eye L): Use this mode if sufficient video output can-
not be obtained even if 30 dB gain up should be selected.
N/Eye H (Night Eye H): Use this setting if it is not possible to
achieve a satisfactory video output even at the Night Eye L setting.
Pedestal
(-150 to +150) The black level (pedestal) of the luminance (Y) sig-
nal can be set. Used in adjusting the black levels of two or more
cameras.
Table 27. Color Settings
Chroma Level
(-3 to +3) Chroma Level can be decreased or increased to any of
three levels each.
Flesh Tone
(-3 to +3) Skin color can be decreased or increased to any of three
levels each.
White Bal
ATW: The white balance is automatically adjusted to be always right.
AWC A, AWC B: Once the white balance is adjusted with the ITEM/
AWC switch on the back of the camera, it is no longer necessary to
set the white balance again if you simply select AWC A or AWC B,
provided that the camera is used under the same conditions. Fine
color adjustment can be made after setting AWC by red/blue gain
adjustment in user mode.
P SET 3200K: The white balance is adjusted to 3200K illumination.
P SET 5600K: The white balance is adjusted to 5600K illumination.
ATW Speed
(Slow 2, Slow 1, Mid, Fast 1, Fast 2) ATW Speed can be set.
Table 26. Brightness Settings