Grass Valley 3-CCD CameraMan - Manual (Page 45)

CameraMan Installation and Operation Manual 45
Menu Item Setting
Menu Item Setting
• Each of the four use modes of the camera has a main menu ( Figure 24 ).
Figure 24. Main Menu - Halogen, Fluorescent, Outdoor Mode
• Each item of the main menu has a submenu comprising several set-
tings.
• These settings have been preset to the optimum values to suit each use
mode, and can be changed to suit actual shooting conditions.
1. On the camera, keep the MENU switch depressed for 5 seconds or
more. The main menu appears on the monitor screen.
2. Each time the MENU switch, ITEM/AWC switch, or NO/BAR switch
is pressed, the blinking item moves up or down.
3. When the YES/ABC switch is pressed after selecting the desired item
to blink, the submenu for the selected item appears on the screen.
4. Select the desired item to be changed in its settings using the MENU
switch and ITEM/AWC switch.
5. Press the YES/ABC switch or NO/BAR switch to change the settings.
6. Select [Return] using the MENU switch and ITEM/AWC, then press
the YES/ABC switch to return to the main menu.
7. After changing the settings, take the following steps. Camera alone:
Select [End] using the MENU switch and ITEM/AWC switch and press
the YES/ABC switch.
Submenus Overview
The submenus on page 46 through page 49 are for Halogen Mode, Fluores-
cent Mode, and Outdoor Mode on the NTSC version of the 4:3 Fixed 3-CCD
Digital Camera. Refer to page page 50 through page 58 for the User Mode
submenus.