Grass Valley 3-CCD CameraMan - Manual (Page 65)

CameraMan Installation and Operation Manual 65
Submenus Overview
Sharpness (DTL) Setting
Figure 42. Sharpness (DTL) Setting Submenu
Table 17. Sharpness (DTL) Settings
DTL Select (Normal, Super DTL) If contour correction is not sufficient at the Normal position when
Detail Level setting is set to LOW or HIGH, select the Super DTL position.
*Neither Normal nor Super DTL is valid for contour correction if Level setting is in the
OFF position.
Level (OFF, Low, High) Detail level can be adjusted when Detail Select setting is at Normal.
Super DTL level can be adjusted when it is at Super DTL.
Noise Suppress (OFF, Low, High) Screen noise can be reduced when Level setting is at High or Low.
Clean DNR (High, Low, OFF) This enables the clean DNR effect to be selected.
3D-DNR (OFF, Low, Mid, High) This enables the 3D-DNR effect to be selected.
*When “Mid” or “High” is selected, the noise is reduced but lag increases.
Flesh DTL Level Low: The roughness of the flesh tones is minimized.
Mid: This is the standard setting.
High: The outline compensation for the flesh tones is accentuated.