Grass Valley 3-CCD CameraMan - Manual (Page 69)

CameraMan Installation and Operation Manual 69
Submenus Overview
Color Settings
Figure 45. Color Setting Submenu
Table 20. Color Settings
Chroma Level (-3 to +3) Chroma Level can be decreased or increased to three levels.
White Bal ATW: The white balance is automatically adjusted to the optimum position.
AWC A, AWC B: color temperature conditions at two points can be stored at AWC A and
AWC B. Once the white balance is adjusted with the ITEM/AWC switch on the back of the
camera, it is no longer necessary to set the white balance again if you simply select AWC A
or AWC B, provided that the camera is used under the same conditions. Fine color adjust-
ment can be made after setting AWC by red/blue gain adjustment in Painting setting.
P SET 3200K: The white balance is adjusted to 3200K illumination.
P SET 5600K: The white balance is adjusted to 5600K illumination.
ATW Speed (Slow 2, Slow 1, Mid, Fast 1, Fast 2) ATW Speed can be set.
Pedestal (-150 to +150) The black level (pedestal) of the luminance (Y) signal can be set. Used in
adjusting the black levels of two or more cameras.
Painting (-150 to +150)
R Gain, B Gain: Fine adjustment of the white balance can be made after AWC setting when
AWC A or AWC B is selected in White Bal setting. The set value returns to 0 after AWC
setting in using the camera alone.
R Pedestal, B Pedestal: Fine adjustment of the black balance can be made after ABC set-
ting. The set value returns to 0 after ABC setting in using the camera alone.
Nega/Posi Posi: Normal image
Nega: Image is shown reversed in darkness and color.
±
±