Grass Valley 3-CCD CameraMan - Manual (Page 60)

60 CameraMan Installation and Operation Manual
Appendix I — CPT 2018-A3DP On-Screen Menus
Figure 36. Back of Camera Block
2. The use mode setting menu ( Figure 37 ) appears on the monitor screen
and one of the use mode blinks.
Figure 37. Use Mode Setting Menu
3. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let
the desired use mode blink.
• MENU switch: The blinking item moves up one.
• ITEM/AWC switch, NO/BAR switch: The blinking item moves down
one.
4. Press the YES/ABC switch. The blinking use mode comes into effect.
After the use mode setting menu is shown for about 5 seconds, the
camera returns to be ready for operation. Then, the camera operates in
the selected use mode.
Note On-screen menu items can only be viewed by connecting to the analog VIDEO
OUT connector on the rear of the camera block.