Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 73)

September 22, 2006 Aurora Browse Installation and Configuration Guide 73
Advanced encoder stand-alone stage
NOTE: Run this test only in the stand-alone stage, with machines that have not yet
been added as managed devices (as in the + Server stage). Once the server is
connected, this test can result in corrupt database records.
Run the test as follows:
1. Make sure that the system is not in use.
2. Make sure the Rules Wizard Service, Thomson Resolver service, and the Thomson
Metadata service are off on the MediaFrame server.
3. On the Advanced encoder, click Start | Programs | Thomson | Aurora Browse |
Diagnostic Tools | Proxy Transfer Client . The Proxy Transfer Client application
opens.
4. Configure as follows to check the connection:
• Host: localhost
• Port: 9230
5. Click Connect . Verify that the “…Update…” and “…Transfer…” buttons become
enabled, which means the connection is successful.