Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 68)

68 Aurora Browse Installation and Configuration Guide September 22, 2006
Chapter 3 Configuring the system
For this configuration stage you configure and test one Advanced encoder and one
Proxy NAS to work together. The Advanced encoder creates storyboard and MPEG
proxy. Configuration pages and procedures are the same for HD and SD Advanced
encoders.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
Refer to “System diagram - K2 storage” on page 12 for a view of the entire system.
To do the basic configuration and testing of a Advanced encoder stand-alone, do the
following:
1. “Configure ASK Location: Advanced encoder” on page 69
2. “Configure Advanced Encoding Control” on page 70
3. “Configure Proxy Asset (NAS): Advanced encoder” on page 72
4. “Configure MPEG encoder: Advanced encoder” on page 72
5. “Test: Advanced encoder stand-alone stage - high-res source” on page 72
6. “Test: Advanced encoder stand-alone stage - MPEG proxy source” on page 74
Advanced encoder stand-alone stage
mpg
Advanced
Encoder
Production Network
th/sb
th/sb
Proxy
NAS
mpg