Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 44)

44 Aurora Browse Installation and Configuration Guide September 22, 2006
Chapter 3 Configuring the system
8. At the iSCSI Initiator Configuration screen, enter client bandwidth:
a. Click Modify .
b. Enter the total bandwidth requirement for this encoder machine. (For
instructions see the next section, “Calculating encoder bandwidth” on page 45 ).
c. Click Assign TOE .
9. Click Next .
10. At the Completing the Configuration Wizard screen, click Finish .
The wizard closes and the encoder reboots.
11. Repeat this procedure for each Advanced encoder or SmartBin encoder that is an
iSCSI client on the K2 Storage System.