Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 164)

164 Aurora Browse Installation and Configuration Guide September 22, 2006
Appendix B Legacy systems
Configure ASK Location: MediaFrame server
This page tells the MediaFrame server where to look for the ASK service. Since the
ASK service runs on the MediaFrame server, you enter localhost for the ASK host
location. On all other machines you must enter the name of the MediaFrame server.
Configure Media Frame Core ASK: Single-channel encoder
Make sure the single-channel encoder’s Ingest Control service is registered with the
ASK software component with a logical name, as explained in
“Configure Media
Frame ASK: Register components” on page 54 .
B
a
sic
A
d
v
ance
d
D
o
not mo
di
fy
http://localhost:280 ASK Location Open this page locally on the MediaFrame server machine.
! Enter localhost , since you are configuring on the MediaFrame server itself.
! Port 9010 is required. See “Ports and services mapping” on page 36 .
! Saves changes. Changes are lost if you leave the configuration page without
updating.
Always click Update… buttons after making changes
It is not necessary to restart a service to put these settings into effect.