Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 156)

156 Aurora Browse Installation and Configuration Guide September 22, 2006
Appendix B Legacy systems
For this configuration stage you configure and test one single-channel encoder, one
NAS, and one Profile XP server to work together.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
Refer to “System diagram - Profile XP or Open SAN storage” on page 137 for a view
of the entire system.
To do the basic configuration and testing of a single-channel encoder, do the
following:
1. “Configure ASK Location: Single-channel encoder” on page 157
2. “Configure Ingest Control: Single-channel encoder” on page 157
3. “Configure Proxy Asset (NAS): Single-channel encoder” on page 158
4. “Configure media server: Single-channel encoder” on page 159
5. “Configure MPEG encoder: Single-channel encoder” on page 160
6. “Test: Encoder stand-alone stage” on page 160
7. “Checklist: Encoder stand-alone stage” on page 162
Encoder stand-alone stage
Proxy
NAS