Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 64)

64 Aurora Browse Installation and Configuration Guide September 22, 2006
Chapter 3 Configuring the system
Before starting this configuration stage you should have a working Aurora Edit/K2
system that uses at least one SmartBin Encoder. In this role, the SmartBin Encoder is
not yet being used as a Aurora Browse machine. Rather, it is just used to host the
SmartBins service. Refer to SmartBins Instruction Guide.
For this configuration stage you configure the SmartBin encoder to work together
with the ingest video server, the Media storage and the Proxy NAS. MDI services are
also required, as configured in the MediaFrame stage. Configuration pages and
procedures are the same for HD and SD Smartbin encoders.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
Refer to “System diagram - K2 storage” on page 12 for a view of the entire system.
To do the basic configuration and testing of the SmartBin, do the following:
1. “Configure ASK Location: SmartBin encoder” on page 65
2. “Configure Media Frame Core ASK: SmartBin encoder” on page 65
3. “Configure SmartBin Encoder Control” on page 65
4. “Configure Proxy Asset (NAS): SmartBin encoder” on page 66
5. “Configure MPEG encoder: SmartBin encoder” on page 66
6. “Test: SmartBin encoder” on page 66
SmartBin encoder stage
mpg
Ingest
Media
Server
MediaFrame
Server
SmartBin Encoder
Production Network* (Gb)
MDI Server
info info
info
info
mpg th/sb
th/sb
AV
AV
AV
Media
Storage
AV
Proxy
NAS
DSM !
!