Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 18)

18 Aurora Browse Installation and Configuration Guide September 22, 2006
Chapter 2 Installing Aurora Browse
MediaFrame server instructions: HAFT-2 platform
For the MediaFrame server you have the option of the High Availability, Fault
Tolerant (HAFT) platform, also known as the Marathon platform. This platform is
made up of two interconnected servers.
NOTE: It is no longer recommended to install Windows Media Player on the HAFT
platform because of compatibility problems, so you can not run the Aurora Browse
application locally on the HAFT platform.
HAFT-2 platform (Dell 2850 servers)
Cable as illustrated and as follows:
• For systems with one unified Production Network, connect port 1 and the CoServer
Management port to the Production Network.
• For systems with a Production Network consisting of a media network and a
control network, connect port one and the CoServer Management port to the
control network.
• Connect port 2 to the Client Network.
• Interconnect CoServer Link ports with cross-over cables.
• Connect power cables to a power supply.
Power supply units are hot-swappable.
PCI-2
PCI-3 A B
A B
VGA cable
to KVM
CoServer
Link port 1 CoServer
Link port 2
Keyboard/mouse
ports to pigtail
to KVM
LAN port 1
CoServer
Management
port
LAN port 2
Power
PCI-2
PCI-3 A B
A B
VGA cable
to KVM
CoServer
Link port 1 CoServer
Link port 2
Keyboard/mouse
ports to pigtail
to KVM
LAN port 1
CoServer
Management
port
LAN port 2
Power