Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 51)

September 22, 2006 Aurora Browse Installation and Configuration Guide 51
Prepare for core configuration stages
Browse launch page and then click the Configuration link. To open the Aurora
Browse launch page, use the following URL:
http://localhost/nbui
The Aurora Browse launch page resides on the MediaFrame server only.
• From a network-connected computer, in the URL replace “localhost” with the
network name of the computer hosting the configuration pages. For example, to
access the configuration pages or the Aurora Browse launch page on a MediaFrame
server named iron-nb-svr, use the following URLs:
http://iron-nb-svr:280
http://iron-nb-svr/nbui
You must have network access to open configuration pages. You can access all
Aurora Browse devices from the MediaFrame server. However, devices on the Client
Network, such as a Aurora Browse client PC, do not have access to all Aurora Browse
devices. From an Aurora Browse client PC you cannot access devices that are on the
Production network only.
To access configuration pages, do the following:
Some pages use Active X controls that require special browser settings, such as the
following:
• In Internet Explorer, click Tools | Internet Options . The Internet Options dialog box
opens. Click Security | Local intranet | Custom Level . The Security Settings dialog
box opens. Under “Initialize and Script ActiveX Controls not marked as safe”,
click
Enable .
Enter the URL to the configuration page at port 280 and press Enter .
Verify the machine name and IP address, to confirm that you are configuring
the correct machine. There can be multiple IP addresses for the different
networks.
Click links to open configuration pages.