Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 28)

28 Aurora Browse Installation and Configuration Guide September 22, 2006
Chapter 2 Installing Aurora Browse
4. Reboot the computer when prompted.
Installing the Generic iSCSI Client Software
The Generic iSCSI Client software is located on the Aurora Suite CD-ROM. Refer to
release notes to verify the version.
To install the software:
1. Navigate to the directory that contains the software.
2. Double-click on the setup.exe file.
The Microsoft iSCSI Initiator software also installs. When the Microsoft iSCSI
Initiator software install completes, the Generic iSCSI Client software install
continues.
3. Once the Generic iSCSI software is installed, restart the machine.
4. When the machine comes back up, check the services as follows:
• Go to Start | Settings | Control Panel | Administrative Tools | Services . The
Start Copying Files Click Next .
Choose Options to Complete
the Installation Leave the checkbox blank and click Next .
File System Name Service
Locations Enter the name or IP address of the K2 Media Server and
click
Next .
Confirm File System Name
Services Host List Click Next .
Establish StorNext File
System Drive Mapping and
Credentials? Click No ; this will be configured automatically when you run
the K2 Configuration application later.
StorNext File System Setup Click Finish .
On this screen... Do this...