Grass Valley Aurora Browse v.6.0b Installation - Manual (Page 102)

102 Aurora Browse Installation and Configuration Guide September 22, 2006
Chapter 3 Configuring the system
derive where the asset components exist in the system.
2. From the general tab on the details page edit the expiration date and select a date
in the past.
3. The purge process polls at configured intervals. To expedite testing go to the
Windows services panel and restart the Asset Manager process. This will cause the
cycle to be reset and assets meeting expiration criteria will be processed
immediately.
4. Refresh the search results list by pressing the go button with no criteria specified.
5. Verify that asset components noted earlier no longer exist in the system. You will
have to look at the NAS for the specific paths to proxy asset components. The asset
on the high-res storage should also be removed.
Add Aurora Browse Clients
The sections in the remainder of this chapter apply to the use of the web-based
SD-only Aurora Browse application. If you are using the SD/HD Advanced Edit
application, also refer to the Advanced Edit Readme file, which you can find on the
Advanced Edit Installation CD.
Do the following tasks to enable PCs to act as a Aurora Browse clients and run the
Aurora Browse application.
• “Connect server and NAS to customer LAN” on page 102
• “Set up client PCs” on page 103
• “Configure Aurora Browse Licenses” on page 104
• “Testing Aurora Browse client operations” on page 110
Connect server and NAS to customer LAN
The MediaFrame server and NAS machines must have network access to the external
LAN of the Aurora Browse client PCs. Work with the IT personnel at the customer
site to configure Domain, DNS suffix, or any other settings required by the site’s
LAN.
Also, make sure that permissions are correct for access to the MediaFrame server
website, which serves the Aurora Browse application. The website uses Integrated
Windows Authentication.
Continue with the next procedure “Set up client PCs” .