H3C Technologies H3C SecPath F1000-E - Manual (Page 84)

5
Displaying Help Information
This configuration task is to display a list of all commands or the help information of an SFTP client
command, such as the command format and parameters.
Follow these steps to display a list of all commands or the help information of an SFTP client command:
To do… Use the command… Remarks
Enter SFTP client view
For more information, see
Establishing a Connection to the
SFTP Server
Required
Execute the command in user view.
Display a list of all commands or
the help information of an SFTP
client command
help [ all | command-name ] Required
Terminating the Connection to the Remote SFTP Server
Follow these steps to terminate the connection to the remote SFTP server:
To do… Use the command… Remarks
Enter SFTP client view
For more information, see
Establishing a Connection to the
SFTP Server
Required
Execute the command in user view.
bye
exit
Terminate the connection to the
remote SFTP server and return to
user view
quit
Required.
Use any of the commands.
These three commands function in
the same way.
SFTP Client Configuration Example
Network requirements
As shown in Figure 13 , an SSH connection is established between Device A and Device B. Device A, an
SFTP client, logs into Device B for file management and file transfer. An SSH user uses publickey
authentication with the public key algorithm being RSA.
Figure 13 Network diagram for SFTP client configuration
Configuration procedure