H3C Technologies H3C SecPath F1000-E - Manual (Page 67)

11
To do... Use the command… Remarks
Configure the server host public
key See Configuring a Client Public
Key
Required
The method for configuring the
server host public key on the client
is similar to that for configuring
client public key on the server.
Specify the host public key name of
the server
ssh client authentication
server server assign
publickey keyname
Required
Establishing a Connection Between the SSH Client and the
Server
Follow these steps to establish the connection between the SSH client and the server:
To do... Use the command… Remarks
For an IPv4 server
ssh2 server [ port-number ]
[ vpn-instance vpn-instance-name ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128
| des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
Establish a
connection
between the
SSH client and
the server, and
specify the
public key
algorithm,
preferred
encryption
algorithm,
preferred
HMAC
algorithm and
preferred key
exchange
algorithm
For an IPv6 server
ssh2 ipv6 server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128
| des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
Required
Use either command in
user view.
Displaying and Maintaining SSH
To do… Use the command… Remarks
Display the source IP address or
interface currently set for the SFTP
client
display sftp client source Available in any view