H3C Technologies H3C SecPath F1000-E - Manual (Page 71)

15
NOTE:
During SSH server configuration, the client public key is required. Therefore, you are recommended to use
the client software to generate an RSA key pair on the client before configuring the SSH server.
Step1 Configure the SSH client
# Generate an RSA key pair.
Run PuTTYGen.exe, select SSH-2 RSA and click Generate.
Figure 5 Generate a key pair on the client 1)
While generating the key pair, you must move the mouse continuously and keep the mouse off the green
process bar shown in
Figure 6 . Otherwise, the process bar stops moving and the key pair generating
process will be stopped.