H3C Technologies H3C SecPath F1000-E - Manual (Page 37)

36
Figure 18 Add a portal device
# Associate the portal device with the IP address group.
As shown in
Figure 19 , on the device list, click the icon in the Port Group Information
Management column of Device to enter the port group configuration page.
Figure 19 Device list
On the port group configuration page, click Add to enter the page for adding a port group, as shown
in Figure 20 . Perform the following configurations:
• Type the port group name.
• Select the configured IP address group. Note that the IP address used by a user to access the
network must be within this IP address group.
• Use the default settings for other parameters.