H3C Technologies H3C SecPath F1000-E - Manual (Page 18)

17
To do… Use the command… Remarks
Display information about portal
users on a specified interface or all
interfaces
display portal user { all |
interface interface-type
interface-number }
Available in any view
Clear portal connection statistics
on a specified interface or all
interfaces
reset portal connection
statistics { all | interface
interface-type interface-number }
Available in user view
Clear portal server statistics on a
specified interface or all interfaces
reset portal server statistics
{ all | interface interface-type
interface-number }
Available in user view
Clear TCP spoofing statistics
reset portal tcp-cheat
statistics
Available in user view
Portal Configuration Examples
Configuring Direct Portal Authentication
Network requirements
As shown in Figure 4 :
• The host is directly connected to Device and Device is configured for direct portal authentication.
The host is assigned with a public network IP address either manually or through DHCP. Before
passing portal authentication, a user using the host can access only the portal server. After passing
portal authentication, the user can access Internet resources.
• A RADIUS server serves as the authentication, authorization, and accounting server.
Figure 4 Configure direct portal authentication
Configuration procedure