H3C Technologies H3C SecPath F1000-E - Manual (Page 112)

4
NOTE:
•
If you choose to input the public key manually, be sure to input it in the correct format. The key data
displayed by the display public-key local public command meets the format requirements. The public
key displayed in other methods may not meet the format requirements. A format-incompliant key cannot
be saved. Thus, you are recommended to configure the public key of the peer by importing it from a
public key file.
• The device supports up to 20 host pubic keys of peers.
Follow these steps to configure the public key of a peer manually:
To do… Use the command… Remarks
Enter system view system-view —
Enter public key view public-key peer keyname —
Enter public key code view public-key-code begin —
Configure a public key of the peer Type or copy the key
Required
Spaces and carriage returns are
allowed between characters.
Return to public key view public-key-code end
—
When you exit public key code
view, the system automatically
saves the public key.
Return to system view peer-public-key end —
Follow these steps to import the host public key of a peer from the public key file:
To do… Use the command… Remarks
Enter system view system-view —
Import the host public key of a peer
from the public key file
public-key peer keyname
import sshkey filename
Required
Displaying and Maintaining Public Keys
To do… Use the command… Remarks
Display the public keys of the local
key pairs display public-key local
{ dsa | rsa } public
Display the public keys of the peers
display public-key peer [ brief |
name publickey-name ]
Available in any view