H3C Technologies H3C SecPath F1000-E - Manual (Page 126)

3
Follow these steps to configure IPv6 packet filtering on an interface:
To do... Use the command... Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure IPv6 packet filtering on
an interface
firewall packet-filter ipv6
{ acl6-number | name
acl6-name } { inbound |
outbound }
Required
IPv6 packets are not filtered by
default
Displaying and maintaining a packet filtering firewall
To do... Use the command... Remarks
View the packet filtering statistics
of the IPv6 firewall
display firewall ipv6
statistics { all | interface
interface-type interface-number }
Available in any view
Clear the packet filtering statistics
of the IPv6 firewall
reset firewall ipv6 statistics
{ all | interface interface-type
interface-number }
Available in user view