H3C Technologies H3C MSR 50 - Manual (Page 86)

use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
• Add the device whose MAC address is 00E0-FC01-0013 to the blacklist.
Figure 27 Network diagram
Configuration procedure
1. Configure the member device Device A:
# Enable NDP globally and for port Ethernet 1/1.
system-view
[DeviceA] ndp enable
[DeviceA] interface ethernet 1/1
[DeviceA-Ethernet1/1] ndp enable
[DeviceA-Ethernet1/1] quit
# Enable NTDP globally and for port Ethernet 1/1.
[DeviceA] ntdp enable
[DeviceA] interface ethernet 1/1
[DeviceA-Ethernet1/1] ntdp enable
[DeviceA-Ethernet1/1] quit
# Enable the cluster function.
[DeviceA] cluster enable
2. Configure the member device Device C:
As the configurations of the member devices are the same, the configuration procedure of Device
C is not shown.
3. Configure the management device Device B:
# Enable NDP globally and for ports Ethernet 1/2 and Ethernet 1/3.
system-view
[DeviceB] ndp enable
[DeviceB] interface ethernet 1/2
[DeviceB-Ethernet1/2] ndp enable
[DeviceB-Ethernet1/2] quit
73