H3C Technologies H3C MSR 50 - Manual (Page 200)

Field Description
content This field contains the content of the system information.
Table 9 Timestamp precisions and configuration commands
Destined to the console, monitor
terminal, log buffer, and log file
Item Destined to the log host
Precision Seconds Milliseconds
Command
used to set the
timestamp
format
info-center timestamp loghost info-center timestamp
Table 10 Description of the timestamp parameters
Timestamp
parameters
Description Example
%0.109391473 Sysname
FTPD/5/FTPD_LOGIN: User ftp
(192.168.1.23) has logged in
successfully.
Time since system startup, in the format of
xxx.yyy. xxx represents the higher 32 bits,
and yyy represents the lower 32 bits, of
milliseconds elapsed.
boot
0.109391473 is a timestamp in the boot
format. System information sent to all destinations
other than log host supports this parameter.
%May 30 05:36:29:579 2003 Sysname
FTPD/5/FTPD_LOGIN: User ftp
(192.168.1.23) has logged in
successfully.
Current date and time, in the format of mm dd
hh:mm:ss:xxx yyy.
date
All system information supports this
parameter.
May 30 05:36:29:579 2003 is a
timestamp in the date format.
<189>2003-05-30T06:42:44
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
Timestamp format stipulated in ISO 8601.
iso
Only system information that is sent to the log
host supports this parameter.
2003-05-30T06:42:44 is a timestamp in
the iso format.
% Sysname FTPD/5/FTPD_LOGIN: User
ftp (192.168.1.23) has logged in
successfully.
No timestamp is included.
none All system information supports this
parameter.
No timestamp is included.
<189>May 30 06:44:22
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
Current date and time without year
information, in the format of mm dd
hh:mm:ss:xxx. no-year-date
Only the system information that is sent to the
log host supports this parameter.
May 30 06:44:22 is a timestamp in the
no-year-date format.
187