H3C Technologies H3C MSR 50 - Manual (Page 80)

Adding a member device
Step Command
138. Enter system view. system-view
139. Enter cluster view. cluster
add-member [ member-number ] mac-address
mac-address [ password password ]
140. Add a candidate device to the cluster.
Removing a member device
Step Command
141. Enter system view. system-view
142. Enter cluster view. cluster
143. Remove a member device from the cluster. delete-member member-number [ to-black-list ]
Rebooting a member device
Step Command
144. Enter system view. system-view
145. Enter cluster view. cluster
reboot member { member-number | mac-address
mac-address } [ eraseflash ]
146. Reboot a specified member device.
Configuring the member devices
Enabling NDP
See " Enabling NDP globally and for specific ports ."
Enabling NTDP
See " Enabling NTDP globally and for specific ports ."
Manually collecting topology information
See " Manually collecting topology information ."
Enabling the cluster function
See " Enabling the cluster function ."
67